| |
- Rugged construction for large
volume production of braille.
- Built-in Paper Cutter.
- Stacking unit designed for
handling braille documents.
- Modular design, easy to service.
- Uses standard paper rolls up to
1 meter in diameter.
- 2 years warranty on parts.
- Prints simultaneously on
both sides of paper.
- High speed, 1200 pages per
hour continuous printing.
- High braille quality. Each
document is an original.
- The printing system is based on
Braillo 400 S with more than 15
years of experience.
Technical Specifications Braillo 400 SR
Format:
Char. per line: 10 - 42 characters
Sheet length: 4 - 14 inches
Sheet width: 140 - 330 mm
Page layout: Normal / Z-fold, Page 1 up / down
Printing Mode: Single / Interpoint
Braille cell: Standard medium 6 or 8 dot
Line spacing: From 0.3175 to 10.16 mm, Standard is 5.08 mm
Paper Weight: 120 - 180 g/m², Recommended 150 g/m²
Printing Speed: 400 characters per second,
approx. 1200 printed pages per hour.
Electrical:
Voltage: Single phase 230V (+/- 10 %), 50/60Hz
Current: Approx. 4 A max
Fuse Printer: 10 A
Power: Approx. 1000 W max
Communication with the computer:
Parallel on Centronics (25 pin D-sub female), or
Serial on RS 232 C (25 pin D-sub male).
Both are electrical isolated with opto-couplers
to prevent noise and ground loops.
Parameters for the serial port:
Baud rate: 150 - 19200
Parity: No / Odd / Even
Data bit: 7 / 8
Stop bit: 1 / 2
Environment:
Temperatures: 15 - 30°C (60 - 86°F)
Rel. Humidity: 40 - 60%
Measurements:
Height: 1430 mm
Width: 1027 mm
Length: 3550 mm
Weight: 300 kilos
The manufacturer reserves the right to change the specifications without further notice.
Produced and marketed by: Distributed by:
BRAILLO NORWAY AS
P. O. Box 447
3101 Tønsberg, Norway
Phone: +47 33 31 66 22
Fax: +47 33 31 66 77
E-mail: braillo@braillo.no
Internet: www.braillo.com
Back : Home
|
