| |
- Rugged construction for heavy production of Braille books..
- Built in Paper Cutter for 4 pages per sheet format.
- Stacks sheets, adds a cover, then staples and folds to make a finished book.
- Modular design, easy to service.
- Uses standard paper rolls up to 1 meter in diameter.
- Prints simultaneously on
both sides of paper.
- 2 years warranty on parts.
- Very high speed, 440 character per second continuous printing.
- Very high braille quality. Each
document is an original.
Technical Specifications Braillo 440 SWSF
Format:
Line length: (when margins = 0,5 inch) 31 - 44 char
Sheet length: Max 330 mm (13 inches)
Sheet width: 4 page, Min. = 417 mm Max.= 585 mm (16,4 to 23 inch)
Page 1: Up / Down
Printing Mode: Single / Interpoint
Margins: Inner/Outer 12,7 - 50,8 mm (0,5 - 2 inches)
Page Length: Max 30 lines per page
Braille cell: Standard medium 6 dot
Line spacing: fixed 5 mm (0,2 inches)
Paper Weight: 120 - 180 g/m² - recommended weight is 150 g/m².
Printing Speed: 440 characters per second; approximately 1300 pages per hour
Electrical:
Voltage: Single phase 220V (± 10 %), 50/60Hz
Current: Approximately 7 A max
Fuse Printer: 10 A
Power: Approximately 1700 W max
Communication with the computer:
Parallel on Centronics (25 pin D-sub female), or
Serial on RS 232 C (25 pin D-sub male).
Both are electrical isolated with opto-couplers to prevent noise and ground loops.
Environment:
Temperatures: 15 - 30°C (60 - 86°F)
Rel. Humidity: 40 - 60%
Measurements:
Height: 1500 mm
Width: 1027 mm
Length: 4150 mm + ca. 2000 mm for paper roll loading and book collecting
Weight: 570 kilos.
Produced and marketed by: Distributed by:
BRAILLO NORWAY AS
P. O. Box 447
3101 Tønsberg, Norway
Phone: +47 33 31 66 22
Fax: +47 33 31 66 77
E-mail: braillo@braillo.no
Internet: www.braillo.com
Back : Home
|
